Results 1 to 5 of 5

Thread: Table Resolution

  1. #1
    Advanced Tuner
    Join Date
    Feb 2006
    Location
    PAC NWest
    Posts
    395

    Table Resolution

    Is it possible to make a table larger to increase its resolution?

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    Depends.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,248
    On most OEM ecm's no. In fact I don't think you can make ANY table on ANY ecm we support larger. At least not off the top of my head.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  4. #4
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    I was thinking more on the lines of some spark tables and VVE and 2 bar OS VE settings where you can extend the 1 axis over.

    But yeah you can't take a say a 2 bar OS that goes up by 10kpa and make it larger so you get better resolution.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  5. #5
    Advanced Tuner
    Join Date
    Feb 2006
    Location
    PAC NWest
    Posts
    395
    Aw crap. But thanks.