Gen3 p59 controller, VCM Scanner finds and speaks to the pcm via obd2 just fine, log and within 1-2 minutes I lose channels it seems.

I have to break connection with laptop: USB in/out, change USB ports, unplug/plug OBD2 into vehicle etc.

I did check/update my drivers, device manager updates says they're good, and I manually updated via the driver zip file from the HPT site too.

Opened a ticket, just reaching out here as well for in hopes of field experience/solution? I had to turn a guy back after a 2 hour drive and all.

Thanks much!