How do I stop my A6 from going to 1st at a stop? Want it to stay in 2nd. I have 3.45 gears now and with the SC, 1st is useless....
How do I stop my A6 from going to 1st at a stop? Want it to stay in 2nd. I have 3.45 gears now and with the SC, 1st is useless....
I don't think it is possible, but not sure why. I have 6l80 on my truck and the lowest 1-2 shift point I can go to is 9mph. It might be a BCM thing, or just other code in the TCM.
The only way to start in 2nd is with TUTD.
2014 Silverado L83 | Knockoff S369 Turbo | LT1 Fuel Pump and Injectors | MAST L84 Port Intake | MS3Pro Secondary Fuel Computer
So putting 0 in the 2->1 shift doesn't work? Works fine in my 6L90 (2013 ZL1 / HSV)
It was done with my SCT tuner...Long story why I changed to HPT but HPT tuner can't find it or won't do it. But he is a prick and I'll leave it at that....
Not sure, I relied on the tuner and haven't messed around AT ALL with HPT and wouldn't know where that setting is... But with that hint I'll start looking....
where specifically is this 2-1 hjtrbo?
04 6.0 silvy china turbo
87 gn
03 stroker evo ww
00 ss camaro
Hope this points you in the right direction. There are 3 tables. If that doesn't work it might be an OS thing. This table is in a T43 TCM for a '13 ZL1 6L90.
1.PNG
its called winter mode, my 2016 truck will start in 2nd from a stop, my issue is it doesn't shift thru the gears in winter mode it just stays in 2nd, and you have to manually shift up
Last edited by flyingfool007; 02-09-2021 at 09:05 AM.
Compare against a LSA auto car. CTSV or ZL1 They use pattern B as normal mode. It will shift out of 1st the first time you leave but after that it will never downshift back to 1
Tuner at PCMofnc.com
Email tuning!!!, Mail order, Dyno tuning, Performance Parts, Electric Fan Kits, 4l80e swap harnesses, 6l80 -> 4l80e conversion harnesses, Installs