Results 1 to 5 of 5

Thread: Injector Balance rates

  1. #1
    Tuner
    Join Date
    Nov 2018
    Location
    Pennsylvania, USA
    Posts
    81

    Injector Balance rates

    I have a high injector balance on my #6 injector of like +3.8 - 4.0mm3, is that the one I would need to replace?

  2. #2
    Banned
    Join Date
    Jan 2018
    Location
    Everywhere
    Posts
    1,772
    Depends, what are all of your other injectors at? Need the full picture from all injectors.

  3. #3
    Tuner
    Join Date
    Nov 2018
    Location
    Pennsylvania, USA
    Posts
    81
    Quote Originally Posted by Jim P View Post
    Depends, what are all of your other injectors at? Need the full picture from all injectors.
    they are all low like 0-1mm3. Would it be the corresponding cylinder that is giving the issue and #6 is the one compensating or am I thinking to deep into it.

  4. #4
    Banned
    Join Date
    Jan 2018
    Location
    Everywhere
    Posts
    1,772
    If #3 was over contributing #6 would be in the negative to compensate to balance it

  5. #5
    Tuner
    Join Date
    Nov 2018
    Location
    Pennsylvania, USA
    Posts
    81
    This is all the cylinders

    injectorbalance.png