i have delphi 50lbs injectors i used the xls injector sheet just wondering if this is correct
49.97637 50.28640 50.59643 50.90646 51.21648 51.52651 51.83654 52.14656 52.45659 52.76662 53.01464 53.32467 53.63469 53.88272 54.19274 54.50277 54.75079
i have delphi 50lbs injectors i used the xls injector sheet just wondering if this is correct
49.97637 50.28640 50.59643 50.90646 51.21648 51.52651 51.83654 52.14656 52.45659 52.76662 53.01464 53.32467 53.63469 53.88272 54.19274 54.50277 54.75079
I get this if its a 3bar injector rated at 50 lbs with fuel rail pressure of 58psi
Injector Flow (lb/hr) 57.7360451 58.09587365 58.4534872 58.80892616 59.16222974 59.51343595 59.86258171 60.20970288 60.55483425 60.89800967 61.23926202 61.57862327 61.91612452 62.25179601 62.58566719 62.91776671 63.24812249
Last edited by S2H; 02-03-2006 at 11:46 AM.
-Scott -
don't ls1's run at 4 bar and if it's a 3 bar injector you would have to convert it to a 4bar inj. i think i heard this from horist
here's the specs if it helps
Part Number 17113738 (OE # 17104487)
Static Flow Rate: 50.0 lb/hr @ 43.5PSI (300kPa) 525cc/min or 6.4gm/sec
Static Flow Rate: 57.7 lb/hr @ 58.0PSI (400kPa) 606cc/min or 7.4gm/sec
Dynamic Flow Rate: 1.1 gm/pulse - 2.5ms pulse width and 10ms repetition rate @ 43.5PSI (300KPa)
Dynamic Flow Rate: 1.3 gm/pulse - 2.5ms pulse width and 10ms repetition rate @ 58.0PSI (400KPa)
oh i also have a gss340 pump if that matters and speedrails.
Last edited by HemitheKat; 02-03-2006 at 12:31 PM.
what is it going in...whats the rated fuel rail pressure...Originally Posted by HemitheKat
important to know...
and my #'s are for a 4 bar car...meaning LS1 fuel rails at 58psi
-Scott -
I have 42lbs in my 408 Im trying to start Does anybody have a scalling of these injectors.Injectors are racetronics delphi 42lbs.How do I input them to get a spreadsheet
Have the same question but i see there hasnt been an answer.
Reply With Quote