Results 1 to 3 of 3

Thread: Jeep Wrangler 2017 Edelbrock supercharger help!

  1. #1

    Jeep Wrangler 2017 Edelbrock supercharger help!

    We have a edelbrock supercharger for Jeep wrangler 2017, we have a unlocked PCM and TCM, but we need the flash file from edelbrock, does anyone have it ?

  2. #2
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    just build a file. no edlebrock doesnt use HPT

    get your load/ timing/ fuel all adjusted for base

    injector data and should be pretty easy
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  3. #3
    Advanced Tuner coanan's Avatar
    Join Date
    Mar 2009
    Location
    S. Florida
    Posts
    582
    Quote Originally Posted by ammar.alqisi View Post
    We have a edelbrock supercharger for Jeep wrangler 2017, we have a unlocked PCM and TCM, but we need the flash file from edelbrock, does anyone have it ?
    2013 300S 5.7 e-force 04-06-2017.hpt

    Stock Eforce tune from my 2013 5.7. some but not all data will cross over. 48lb inj in kit. Edelbrock uses SCT, this was copied from pcm using HPtuner.
    2018 Trackhawk PCM/TCM tune by Dusterhoff.
    Flex Fuel, MMX faux 95mm TB, GripTec 2.85, 10% ATI lower, FIC1200, ARH 1 7/8 w/cats, 180 T-stat

    13 Chrysler 300S, RAM BGE 412 stroker, cam motion 232/246 619/619 118 +4, ATI 18% OD pulley
    Whipple Gen5 3.0, 2.50 upper pulley, Smooth Boost controller, FIC 1200 inj. Nick W 108mm TB, FORE dual return fuel system, E85, FTI 2800 stall(SRT83380), SHR WAR Viking trans and valve body, Getrag 3.73, 1 7/8 kooks w/hi-flow cats, 3" Magnaflow Cat-back 943rwhp