We have a edelbrock supercharger for Jeep wrangler 2017, we have a unlocked PCM and TCM, but we need the flash file from edelbrock, does anyone have it ?
We have a edelbrock supercharger for Jeep wrangler 2017, we have a unlocked PCM and TCM, but we need the flash file from edelbrock, does anyone have it ?
just build a file. no edlebrock doesnt use HPT
get your load/ timing/ fuel all adjusted for base
injector data and should be pretty easy
Follow @MASTUNING visit www.mastuned.com
Remote Tuning [email protected]
Contact/Whatsapp +966555366161
2013 300S 5.7 e-force 04-06-2017.hpt
Stock Eforce tune from my 2013 5.7. some but not all data will cross over. 48lb inj in kit. Edelbrock uses SCT, this was copied from pcm using HPtuner.
2018 Trackhawk PCM/TCM tune by Dusterhoff.
Flex Fuel, MMX faux 95mm TB, GripTec 2.85, 10% ATI lower, FIC1200, ARH 1 7/8 w/cats, 180 T-stat
13 Chrysler 300S, RAM BGE 412 stroker, cam motion 232/246 619/619 118 +4, ATI 18% OD pulley
Whipple Gen5 3.0, 2.50 upper pulley, Smooth Boost controller, FIC 1200 inj. Nick W 108mm TB, FORE dual return fuel system, E85, FTI 2800 stall(SRT83380), SHR WAR Viking trans and valve body, Getrag 3.73, 1 7/8 kooks w/hi-flow cats, 3" Magnaflow Cat-back 943rwhp