Results 1 to 5 of 5

Thread: ok so dumb question

  1. #1
    Tuner in Training
    Join Date
    May 2018
    Posts
    13

    ok so dumb question

    cant i just wire a wideband into mvpi dongle?customer has no desire for a gauge just a safe tune and i have a w/b o2 laying here and wiring

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    If you have the MPVI Pro, yeah you can.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Tuner in Training
    Join Date
    May 2018
    Posts
    13
    so i need nothing other than a wideband o2 and the pod? or do i need some kind of module to run o2?

  4. #4
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    The wideband has to have a controller or a gauge itself, it can't just be the sensor. So like if it was a AEM UEGO wideband or something, that would wire straight into the green piece on the MPVI Pro dongle. Setup the scanner to read the wideband and start tuning.

    The newer MPVI2 needs the pro interface too if you had that or go to a serial adapter to read it.

    There are other ways to use a wideband but if you have the PRO it's really simple.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  5. #5
    Tuner in Training
    Join Date
    May 2018
    Posts
    13
    i have old school mvp1 (?) pro......it has a place to connect it