It keeps going to combustion stability at about the same time. I have changed the settings every which way there with no luck, it transitions to combustion stability and kicks it over to stoich at WOT at 4500.
I don't see how. Anyhow DD and actual are within 10-20 through the pull and it still did this. Changed the Trans Torque Truncation vs Gear 40070 and bumped limits up and all of this cleared up. Stays in OL opt power and follows commanded AFR and keeps timing and throttle open.
do these raptors lack tables for combustion stability? im getting a driver demand source of combustion stability limit in a 14 6.2 with a whipple and it shuts the tb when I go wot at 3k and wont fully open until 4500 I already maxed out cs torque limit and map and spark but tb still wont open past 75%