We have a 2000 K3500 4x4 Vortec 454 - Fresh-rebuild/stroked to 496, .520 cam, 10:1 CR, 42# injectors, 90mm MAF & TB, Headers, built for Torque. All new sensors.
Tried to start it today, hooked up battery and turned key, it ran for 30 secs, then died as we had the Idle screw on TB set too low to idle. Now, it won't start. It is getting fire, but won't start again. Smells RICH. We have the HPT MPVI2 with 2-Credits and the base VCM Scanner/Editor software. We have NO CLUE what we are doing, just want to get this thing running and take to someone who can tune, or find someone who can help put a tune in it. Stock-tune attached.
Please let me know if you can point me in the right direction.
Really appreciate ANY help!
-Neal