Results 1 to 2 of 2

Thread: Add Turbo Fueling to E67 OS Which Did Not Originally Have?

  1. #1
    Tuner in Training
    Join Date
    Nov 2016
    Posts
    35

    Add Turbo Fueling to E67 OS Which Did Not Originally Have?

    Hi all. I'm looking to add a low level of turbo boost (10psi or less) to my factory V8 Colorado, 2009 5.3L E67. Can this be done via HPT using the factory operating system? I think I need to keep my original OS for the dash to work, etc....? Not exactly sure if positive pressure fueling can be added to an operating system which did not originally have it, or if HPT has the capability to do it. If so, is it just a matter of adding a boost type MAP sensor and extend then adjust the fueling tables?

    Thanks. Want to get this determined before I buy hard parts.

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,559
    Yes, you can. Tons of people do it.

    Not many OS's support the 2 bar OS upgrade, so if your stock file doesn't have the option you just continue to tune it the way you were. Pick a targer fuel ratio and timing numbers and make the MAF/VVE get you to that target ratio.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.