hello there
im having a problem with the fan wont turn off unless i turn off the car of move over 15MPH
im tuning E40 ECM
any help would be appreciated
Thanks
hello there
im having a problem with the fan wont turn off unless i turn off the car of move over 15MPH
im tuning E40 ECM
any help would be appreciated
Thanks
With the temp vs state, do you have one value set to 25? If not, it will run all the time as it sees a request for the fans at all times
2006 Pontiac GTO
M6
Flex Fuel enabled
FIC1000 shorty Injectors
DW300C Fuel pump
UPP GTO Auxiliary fuel system
BoostDistrict LSA Conversion
BTR Stage 3 PDS Torque cam and kit
Kooks Longtube headers with High Flow Cat mids
BoostDistrict LSA CAI with LS7 MAF module
Mickey Mouse Catch Can
Hinson 1/2" lowered Engine Mounts
Magnaflow 3" Cat Back Competition Exhaust
PLX DM-6 Wideband
Turbo Technologies Full Flex fuel Tune
blazer 2005 v8 5.3 fan.hpt
this is the file , i already have set some values to 0
This
2000 Camaro SS 2015 L83 port injected, Whipple 3.0, 4L80E, 8.8 Ford
2013 Silverado 5.3, 6L80k 8.8
I gave it a try but no luck... Just read some threads and I found out that on E40&E67 the fan won't turn off unless the speed of the car above 15MPH and that due some GMPP rule unfortunately Hptuners has no solution for this
Thanks very much for the support
I have no issues with mine staying on. It cycles with temp as it should, even after flashing with HPTuners and lowering fan set points. I'll post a screenshot of the appropriate tables later today
2006 Pontiac GTO
M6
Flex Fuel enabled
FIC1000 shorty Injectors
DW300C Fuel pump
UPP GTO Auxiliary fuel system
BoostDistrict LSA Conversion
BTR Stage 3 PDS Torque cam and kit
Kooks Longtube headers with High Flow Cat mids
BoostDistrict LSA CAI with LS7 MAF module
Mickey Mouse Catch Can
Hinson 1/2" lowered Engine Mounts
Magnaflow 3" Cat Back Competition Exhaust
PLX DM-6 Wideband
Turbo Technologies Full Flex fuel Tune
Them I'm assuming there could be a later calibration which could solve the problem. I will try update the calibration but first I will have a look on your file tables
Thanks in advance
2006 Pontiac GTO
M6
Flex Fuel enabled
FIC1000 shorty Injectors
DW300C Fuel pump
UPP GTO Auxiliary fuel system
BoostDistrict LSA Conversion
BTR Stage 3 PDS Torque cam and kit
Kooks Longtube headers with High Flow Cat mids
BoostDistrict LSA CAI with LS7 MAF module
Mickey Mouse Catch Can
Hinson 1/2" lowered Engine Mounts
Magnaflow 3" Cat Back Competition Exhaust
PLX DM-6 Wideband
Turbo Technologies Full Flex fuel Tune
I did try those tables but again no luck,, it is nice to see tuner with 3d printing experience
Thanks for the support