Results 1 to 3 of 3

Thread: Cobra jet 123mm transfer function

  1. #1
    Advanced Tuner
    Join Date
    Mar 2019
    Posts
    350

    Cobra jet 123mm transfer function

    I am looking for the MAF transfer for this if anyone has it, it is with the inlet bell.

    Thanks,
    Ben

  2. #2
    Advanced Tuner
    Join Date
    Feb 2012
    Location
    TEXAS
    Posts
    631
    5 112.083297729492
    4.67500019073486 90.2020111083984
    4.34999990463257 72.9491271972656
    3.92000007629395 54.9933013916016
    3.73600006103516 48.5499114990234
    3.52900004386902 42.0010108947754
    3.30100011825562 35.5320205688477
    3.04200005531311 29.0201206207275
    2.89400005340576 25.666389465332
    2.7279999256134 22.2055206298828
    2.54099988937378 18.4890403747559
    2.3199999332428 14.7404804229736
    2.09208011627197 11.0231704711914
    2.00015997886658 9.92085361480713
    1.85863399505615 8.451096534729
    1.70071399211884 6.98134088516235
    1.5254180431366 5.5115852355957
    1.41551995277405 4.7767071723938
    1.31321001052856 4.04182910919189
    1.26634097099304 3.67439007759094
    1.13169705867767 2.93951201438904
    0.972478687763214 2.20463395118713
    0.883307218551636 1.83719503879547
    0.770135223865509 1.46975600719452
    0.70176899433136 1.2860369682312
    0.625837683677673 1.10231697559357
    0.541355192661285 0.91859757900238
    0.43893301486969 0.734878122806549
    0.305661588907242 0.551158487796783
    0 0

  3. #3
    Advanced Tuner
    Join Date
    Mar 2019
    Posts
    350
    That is really helpful, I had calculated off of the stock MAF and was way off.