I am asking for your understanding.
I'm learning...
- O2 rear delete
- Vats disable.
- No BCM in my application.
- Gas pedal comes from corvette c6 on L99.
The engine goes off immediately after the start.
See the video from my scanner.
https://youtu.be/Mq77c5Grw6U
Injection does not show work.
What could be the reason?
Probably some cable I forgot to connect well.
Explain how to a child
0x7E8: P0120 - Throttle / Pedal Position Sensor A Circuit (Permanent)
0x7E8: P0122 - Throttle / Pedal Position Sensor A Circuit Low (Pending, Current, Old, Permanent)
0x7E8: P0223 - Throttle / Pedal Position Sensor / Switch B Circuit High (Pending, Current, Old, Permanent)
0x7E8: P0532 - A / C Refrigerant Pressure Sensor A Circuit Low (Current, Old, History)
0x7E8: P0557 - Brake Booster Pressure Sensor Circuit Low (Pending, Current, History)
0x7E8: P0606 - ECM / PCM Processor (Permanent)
0x7E8: P0615 - Starter Relay Circuit (History)
0x7E8: P2068 (Pending, Old)
0x7E8: U0101 - Lost Communication with TCM (Pending)
0x7E8: U0109 - Lost Communication With Fuel Pump Control Module (Pending)
0x7E8: U0121 - Lost Communication With Anti-Lock Brake System (ABS) Control Module (Old)
0x7E8: U0140 - Lost Communication With Body Control Module (Pending)