Results 1 to 3 of 3

Thread: 98 chevy grumman PCM 4.3l circuit board fried. (need to know diode or resistor)

  1. #1
    Potential Tuner
    Join Date
    Mar 2019
    Posts
    3

    Post 98 chevy grumman PCM 4.3l circuit board fried. (need to know diode or resistor)

    Hey guys, im new here and am trying to save a buck if i can. I hope some one out there can help me identify the component i need to replace on the circuit board of my pcm. It is off of a 98 chevy grumman van 4.3L vortec. it looks like the case cracked and let some moisture in and there was a good amount of green corrosion around the diode and the little guy beside it (not sure if its a diode or resistor) maybe some one has opened one up and can let me know the specific part i need to re solder.
    Thanks,,
    wont let me post pics dam it

  2. #2
    Potential Tuner
    Join Date
    Mar 2019
    Posts
    3
    i can email pics

  3. #3
    Potential Tuner
    Join Date
    Mar 2019
    Posts
    3
    image4.jpg
    image3.jpgimage1.jpg
    Holy crap that took forever but i got the pics up!
    Last edited by kozijn; 4 Weeks Ago at 03:03 PM.