Results 1 to 14 of 14

Thread: need some answers plz someone

  1. #1
    Tuner in Training
    Join Date
    Oct 2018
    Location
    denham springs, la
    Posts
    17

    Cool need some answers plz someone

    I'm not using a hp tuner and wish I was but I didn't know about it at the time I bought my first tuner. I'm running a L31 350 with a built tranny and rebuilt rear end with 373 gears under a 99 chevy burb. I'm using the jet dst tuner and know its got some different named tables but its basically the same. I want to know if the setting under fuel parameters labeled power enrichment rate period should be set higher than factory 0.00 sec, i'm going to try and post a pic of what i'm looking at on my screen. have some other answers needed as well. thanks in advance, Neil.IMG_155372669152F.jpgIMG_155372669152F.jpg

  2. #2
    Tuner in Training
    Join Date
    Oct 2018
    Location
    denham springs, la
    Posts
    17
    didn't mean to post the pic more than once lol oops ins claims for sale, cost 1.295 lol

  3. #3
    Senior Tuner
    Join Date
    Jun 2004
    Location
    405
    Posts
    2,287
    Looking at that vehicle with Tunercat, same as Jet,

    Stock setting is 0.05

    PE Enable TPS Threshold Hysteresis should be 5.1%, not 0

  4. #4
    Tuner in Training
    Join Date
    Oct 2018
    Location
    denham springs, la
    Posts
    17
    ok thank you, is this both stock settings that your telling me?

  5. #5
    Tuner in Training
    Join Date
    Oct 2018
    Location
    denham springs, la
    Posts
    17
    I have talked to the people at tuner cats and got to get a stock file to start over with that's why i ask if the settings your telling is stock

  6. #6
    Senior Tuner
    Join Date
    Jun 2004
    Location
    405
    Posts
    2,287
    Quote Originally Posted by 2xLS1 View Post
    Looking at that vehicle with Tunercat, same as Jet,

    Stock setting is 0.05

    PE Enable TPS Threshold Hysteresis should be 5.1%, not 0
    .....

  7. #7
    Senior Tuner
    Join Date
    Jun 2004
    Location
    405
    Posts
    2,287
    Post your vin # and I'll get you a stock file.

  8. #8
    Tuner in Training
    Join Date
    Oct 2018
    Location
    denham springs, la
    Posts
    17
    Ok cool, soon as I get done with my coffe I'll go outside and get it.thank you big, you saved me 40 bucks to get from tuner cats

  9. #9
    Tuner in Training
    Join Date
    Oct 2018
    Location
    denham springs, la
    Posts
    17
    Time*

  10. #10
    Tuner in Training
    Join Date
    Oct 2018
    Location
    denham springs, la
    Posts
    17
    okey dokey my vin is 1GNEC16R2XJ557285. just curious but were do you get the stock files from?

  11. #11
    Senior Tuner
    Join Date
    Jun 2004
    Location
    405
    Posts
    2,287
    I could tell you but then I'd have to kill you. I need an email address to send it to. You can PM it to me. There has been one update from GM since the vehicle was new to eliminate false P1404 codes. The file will have that update and will be in .jcl format.

    Srs, I do this professionally and have multiple tuning platforms and an extensive library of read vehicles. I can look up from GM what modules are correct for a particular VIN and build any file from that information.

  12. #12
    Tuner in Training
    Join Date
    Oct 2018
    Location
    denham springs, la
    Posts
    17
    Cool, I'll send my email. Thank you for your help. How do I get it to .Cal file ?

  13. #13
    Senior Tuner
    Join Date
    Jun 2004
    Location
    405
    Posts
    2,287
    .jcl is DST format. .cal is Tunercat.

  14. #14
    Tuner in Training
    Join Date
    Oct 2018
    Location
    denham springs, la
    Posts
    17
    did you get my email address?