Results 1 to 4 of 4

Thread: Maf Tuning

  1. #1
    Potential Tuner
    Join Date
    Feb 2019
    Posts
    1

    Maf Tuning

    Working on 2019 CAMARO when making changes to the maf table while monitoring the maf vrs ltft table in scanner and then writing the changes by multiplying by % it dosnt seem to actually be making the changes anyone have same problem or kn w of something that needs to happen with the 2019's ?????

  2. #2
    Did you make sure that the column labels from your error graph matches that of the MAF table?

  3. #3
    Advanced Tuner Ghostnotes's Avatar
    Join Date
    Feb 2012
    Location
    Houston, TX
    Posts
    471
    Make sure you highlight the entire table in the scanner, it should turn blue. Then copy. Next go to the editor highlight the entire table there, then multiply by%.
    I always tune VVE....
    2016 C7 M7 Z51
    Callies ultra billet crank
    Callies ultra billet rods
    Diamond pistons
    Jhonson high speed lifters
    Ported and polished headwork
    Custom cam
    YSi-V7

  4. #4
    Advanced Tuner
    Join Date
    Aug 2018
    Posts
    289
    Long shot here:
    Also make sure your scanner is setup so it shows 1 for 1%, not 0.01. Another example- 3.5% should show as 3.5 in the scanner, not 0.035.