Results 1 to 3 of 3

Thread: Cant see all channels for a 6L80E, do I need to be using the beta?

  1. #1

    Cant see all channels for a 6L80E, do I need to be using the beta?

    I have been looking at the log file on https://forum.hptuners.com/showthrea...-timing-swings and there are channels for the T43 A6 that I cant see on my own T43 A6.
    The channels I cant see are;

    Clutch shift type
    Trans torque management type
    Trans speed control torque management


    I am using scanner version 4.2.12 which was downloaded today and I repolled the vehicle just now.
    Attached is my tune file for reference, I see my transmission OS isn't the same as the one in the link but I thought that shouldn't matter for the scanner.

    GXP62L TUNE 2.025 MAF CL warm up, fan changed.hpt

    What do I need to do to see these channels? Do I need to be using the beta software?
    2010 GXP Maloo ute, LS3, 6L80E.
    MM heads, 240/252@50 solid cam, 12.75:1 compression, 4500 Dominator converter, 3.46 rears.
    Shooting for 10s eventually.

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    I think emailing support would be your best bet, they'd let you know if it's something on your end or theirs for getting those channels to work.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    I will, just thought I ask here first in case I'd missed something obvious.
    2010 GXP Maloo ute, LS3, 6L80E.
    MM heads, 240/252@50 solid cam, 12.75:1 compression, 4500 Dominator converter, 3.46 rears.
    Shooting for 10s eventually.