I swapped an LQ9 complete into an S10 & I'm not getting a grounding signal out of the computer to run the compressor.
Idea's?
I have the low pressure switch bypassed
I swapped an LQ9 complete into an S10 & I'm not getting a grounding signal out of the computer to run the compressor.
Idea's?
I have the low pressure switch bypassed
2001 S10 Xtended cab LQ9, Elgin 1839P cam, T56, Camaro brakes, 8.8 axle, 3.73 gears
I have verified power from the switch to the computer & a ground signal from the low pressure switch to the computer, still no ground from the computer to fire the relay
2001 S10 Xtended cab LQ9, Elgin 1839P cam, T56, Camaro brakes, 8.8 axle, 3.73 gears
OK, I have a code P0480 and a cooling fan relay clicking in & out.
Also have a code P0530
2001 S10 Xtended cab LQ9, Elgin 1839P cam, T56, Camaro brakes, 8.8 axle, 3.73 gears
I realize I'm talking to myself, but I swapped to a different PC & the problem is gone, but a new one popped up.
one of the cooling fans runs constantly now.....
Any Idea's?
2001 S10 Xtended cab LQ9, Elgin 1839P cam, T56, Camaro brakes, 8.8 axle, 3.73 gears