Results 1 to 6 of 6

Thread: WOT shifting issues at track. twin turbo escalade

  1. #1

    WOT shifting issues at track. twin turbo escalade

    2010 escalade twin turbo setup. I have an issue that is costing me alot at the track. It goes to nearly 6k rpm in third but doesn't shift to 4th instead it stays in 3rd and bounces timing down negative and drops RPM way down. Any ideas?


    ID1050XSDVVE2OL.hpt trackrun.hpl
    2008 Corvette
    UPP Twin turbo T4 67mm BB billet wheel kit
    427 LME Billet Setup
    Fore Innovations Triple 465 L4 Setup
    FIC 2150 injectors
    RPM TH400/9 inch
    Pro Torque Bolt Together Converter
    MaxxECU Stand Alone

  2. #2
    Advanced Tuner
    Join Date
    Feb 2015
    Location
    Perth, Australia
    Posts
    974
    would suspect its running off the safety shift tables.

    can you not apply the custom SD OS to this?

  3. #3
    Quote Originally Posted by lukearmstrong1990 View Post
    would suspect its running off the safety shift tables.

    can you not apply the custom SD OS to this?
    no it won't allow an OS change
    2008 Corvette
    UPP Twin turbo T4 67mm BB billet wheel kit
    427 LME Billet Setup
    Fore Innovations Triple 465 L4 Setup
    FIC 2150 injectors
    RPM TH400/9 inch
    Pro Torque Bolt Together Converter
    MaxxECU Stand Alone

  4. #4
    No one? Also see it closed the TB shut when I was in it.
    2008 Corvette
    UPP Twin turbo T4 67mm BB billet wheel kit
    427 LME Billet Setup
    Fore Innovations Triple 465 L4 Setup
    FIC 2150 injectors
    RPM TH400/9 inch
    Pro Torque Bolt Together Converter
    MaxxECU Stand Alone

  5. #5
    Advanced Tuner
    Join Date
    Feb 2015
    Location
    Perth, Australia
    Posts
    974
    looking again at your log you can see its trans TM ripping all the spark out as it tries to make the 3-4 shift.

    your trans file shows WOT shift RPM of 5200 or 5425 depending which table its referencing. but all the 100% TPS and 3-4 WOT shift speeds are like 139, 143km/h etc. its likely the car goes into TM because its reached its shift RPM point but is still 30% or more off its required speed to make the shift. get the 3-4 WOT speeds and RPM to correlate and it'll likely fix your problem

  6. #6
    Thanks for response. I will look into it and get back with results in the next few days.