Results 1 to 3 of 3

Thread: Help logging knock???

  1. #1
    Tuner in Training
    Join Date
    Feb 2011
    Posts
    22

    Help logging knock???

    I've included a screen shot, and calibration file.. maybe I'm missing something? This is for a 2011 VQ37VHR... not seeing any channels to actually log knock, or trims... and I can only log Timing Advance... am I supposed to assume this is final advance, after all compensations, trims, etc have been completed?

    How are others logging and adjusting for possible knock? do I need to setup a spreadsheet to compare Low Det / High Det and logged Timing advance to figure out if timing was pulled?


    START.hpt




    Annotation 2019-04-09 134408.png
    Last edited by b3tuning; 04-09-2019 at 04:45 PM.

  2. #2
    Potential Tuner
    Join Date
    Mar 2019
    Posts
    7
    I havent seen a way yet.

  3. #3
    Quote Originally Posted by b3tuning View Post
    I've included a screen shot, and calibration file.. maybe I'm missing something? This is for a 2011 VQ37VHR... not seeing any channels to actually log knock, or trims... and I can only log Timing Advance... am I supposed to assume this is final advance, after all compensations, trims, etc have been completed?

    How are others logging and adjusting for possible knock? do I need to setup a spreadsheet to compare Low Det / High Det and logged Timing advance to figure out if timing was pulled?


    START.hpt




    Annotation 2019-04-09 134408.png
    The timing advance shown in the scanner is final advance after all corrections/trims have been applied. There should be a memory parameter for knock feedback as well as knock count, if you don't see them please submit a support ticket