Results 1 to 5 of 5

Thread: NGauge PID 2019 Ranger help.

  1. #1
    Potential Tuner
    Join Date
    Apr 2019
    Posts
    1

    NGauge PID 2019 Ranger help.

    Hey everyone, so I have been trying to get a few PID?s visible for my 2019 Ranger but I found the 2008+ Ford Gas PID set to be lacking a few items I found in the ?Ford All? list but that list is missing some from the other list.

    My question is, can I take a PID from one list and add it to another list? Somehow create a custom PID list to view on the gauges display? Is it possible to add these PID addresses to a file on the SD card?

    Thank you for your time!

  2. #2
    Advanced Tuner LastPlace's Avatar
    Join Date
    Jul 2016
    Posts
    334
    Email emotion support, ngauge is their product

  3. #3
    Advanced Tuner
    Join Date
    Dec 2017
    Posts
    414
    What software version on you on in the nGauge

  4. #4
    Advanced Tuner LastPlace's Avatar
    Join Date
    Jul 2016
    Posts
    334
    The current beta is fw299

  5. #5
    Tuner in Training
    Join Date
    Feb 2019
    Location
    Lewisville Texas
    Posts
    26
    the guage max allows you to watch live up to 6 pids at once on a single screen. but when you click the STAR on every pid you want to monitor in the background it will record whenever you data log it. my problem is ive recorded a bunch of pids into my guage then exported it into the vcm scanner. my raw data shows on the list on the left side but nothing shows in my graphs.

    Yes you can create you own pid list... so for instance when i sell a customer one i can send him a pre loaded tune and custom pid list i want to see when i tell him to datalog and send back to me
    Last edited by timskmperf; 05-05-2019 at 07:06 AM.