Currently car has a FiTech 1200 and MSD 6014 box. It's a Gen 3 6.0 bored .60 over with 24X tooth reluctor. 4L80 setup with MSD controller. I would like to change over to harness and injector setup with GM ECU. My question is which ECU should I get? I want to be able convert over to SD 3 bar or at least 2.5 setup. Thanks in advance.
Early P01 LS computers would be a good bet.
Like 2001-2002 camaro/firebird computers.
2000-2002 silverado/sierra computers, in pretty much any flavor from 4.8/5.3/6.0 engines.
Those would all be drive by cable computers as well. I'd pick your harness based on which vehicle/computer you get it from.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
https://swapspecialties.com/product/...alone-harness/
Will prob be doing this harness
Reply With Quote