Results 1 to 5 of 5

Thread: If anyone is bored and wants to look at a scan and tune

  1. #1
    Tuner in Training
    Join Date
    Jan 2019
    Posts
    24

    If anyone is bored and wants to look at a scan and tune

    I have been chasing my tail on this i am new to it. 5.3 turbo small cam 93 octane. Snowing so cant drive it only running in garage.
    i am getting knock retard what could i be over looking


    4122019 4.hpl
    Robs 97 camaro 4122019 ve table change.hpt

  2. #2
    Senior Tuner Lakegoat's Avatar
    Join Date
    Jul 2012
    Location
    Florida
    Posts
    1,459
    Looks like you are in SD mode so take out the mass airflow from channels. I don't see a wideband --may just be me, but do you have one setup in HPT? In Power Enrichment, I would change MAP Enable to 85 kpa and Boost Enable to 105 kpa. Make rpm delay to 0. It may be that you are just a little lean when you blipped the throttle. May have to add some more fuel to the ve table--but that depends on the wideband.
    2000 Camaro SS 2015 L83 port injected, Whipple 3.0, 4L80E, 8.8 Ford
    2013 Silverado 5.3, 6L80k 8.8

  3. #3
    Tuner in Training
    Join Date
    Jan 2019
    Posts
    24
    Lakegoat on chart vs time there is a WB and WB error. i changed the parameters you suggested. Where would i add the fuel in the ve table.

    wb02 screen.jpgWB 02 try .jpg
    Attached Images Attached Images
    Last edited by shock; 04-13-2019 at 09:28 AM. Reason: wrong picture

  4. #4
    Tuner in Training
    Join Date
    Jan 2019
    Posts
    24
    I apologize for the 4 screen shots. but one of them has the wbo2 high lighted.

  5. #5
    Tuner in Training
    Join Date
    Jan 2019
    Posts
    24
    4132019 5 in gear.hpl

    OK can any one help me figure out why i keep getting knock. I am stumped.