Results 1 to 3 of 3

Thread: Max Engine Torque vs. RPM vs. Gear/ Max Torque vs. RPM (1st Gear) e38

  1. #1
    Potential Tuner
    Join Date
    Jan 2019
    Posts
    8

    Max Engine Torque vs. RPM vs. Gear/ Max Torque vs. RPM (1st Gear) e38

    engine>trq management>general>max torque vs rpm vs gear and/or max torque vs rpm be used to limit torque delivered during launch at the strip? 10 camaro a6 with 3.91 worked great until I installed my blower. I am having a tough time getting it to stick. Is there a way to limit the power on just first gear launch?

  2. #2
    Senior Tuner
    Join Date
    Jan 2014
    Location
    Australia
    Posts
    1,028
    can look into limiting the ETC opening rate for the 1st gear it may help in the airflow, elec throttle tab

  3. #3
    Advanced Tuner
    Join Date
    Feb 2015
    Location
    Perth, Australia
    Posts
    800
    using those 2 tables and tip in torque limiting vs gear tables can be used. or look into enabling supercharger torque management and playing in that area.

    or look at your launch RPM and transition through the spark tables. generally at the strip post launch the car will never see launch rpm and spark load again. so you can reduce spark in that area to remove power on launch too.