Results 1 to 3 of 3

Thread: Scanning 2016 Cummins

  1. #1

    Scanning 2016 Cummins

    I have my 2004 cummins as my licensed vehicle in HPT. Can I scan other trucks without additional licenses? I hooked up to my friends 2016 Cummins and it wont come up with any options to scan. We are trying to see injector balance rates etc. Any ideas?
    2004.5 Cummins.
    Borgwarner 13009097047 s300sxe 63-73 compressor 63/80 super core turbine housing 80mm .83 A/R Twin Scroll Housing,
    50HP BMS/Exergy Injectors
    BD T4 manifold,
    BD CAI,
    5" turbo back exhaust,
    turbosmart ext wastegate,
    BD lift pump with 2 mic filter and h2o separator,
    banks intercooler, Banks intake horn,
    slightly built tranny.......

  2. #2
    Advanced Tuner Boost's Avatar
    Join Date
    Dec 2006
    Location
    Florida, USA
    Posts
    303
    Are you using the scan tool and not the editor? Only asking because licenses are not needed for scanning
    '12 Caprice PPV 6.0 L77 - daily transportation
    8.7 @ 84 (1/8 mile) bolt-ons

    '02 Silverado RCSB 5.3 L59 - regularly street driven
    8.2 @ 86 (1/8 mile) stock cam and spray
    8.6 @ 84 (1/8 mile) cam and heads no spray

    Our YOUTUBE CHANNEL featuring the Silverado

  3. #3
    Yeah, just the scan tool. For some reason it wont give any useful options on his truck. We tried idling up a bit, on, off a few times, plugging and unplugging MVPI2, waiting 5 min with truck running. No luck. I just get some generic items that it will read like rail pressure and rpm.
    2004.5 Cummins.
    Borgwarner 13009097047 s300sxe 63-73 compressor 63/80 super core turbine housing 80mm .83 A/R Twin Scroll Housing,
    50HP BMS/Exergy Injectors
    BD T4 manifold,
    BD CAI,
    5" turbo back exhaust,
    turbosmart ext wastegate,
    BD lift pump with 2 mic filter and h2o separator,
    banks intercooler, Banks intake horn,
    slightly built tranny.......