Results 1 to 4 of 4

Thread: Negative Intake Valve Temperatures WOT?

  1. #1
    Tuning Addict WS6FirebirdTA00's Avatar
    Join Date
    Jan 2005
    Location
    Concord, NC
    Posts
    8,093

    Negative Intake Valve Temperatures WOT?

    Guys, just happened to see in one of my logs at WOT the intake valve temp was in the 250C range and then went to negative 250C (ish).

    This seems odd, curious if other see this or have an explanation why it is switching. I am curious if there is a bug in the scanner or if this is a vehicle thing.

    Check out the attached log at 5 minutes.
    Attached Files Attached Files
    Sulski Performance Tuning
    2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
    2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB

  2. #2
    Senior Tuner Ben Charles's Avatar
    Join Date
    Aug 2009
    Location
    Calibrating
    Posts
    3,371
    It’s a bug, most gen 5s been doing this for a while

    Email Tunes, [email protected]
    96 TA Blown/Stroked, 4L80E/Fab 9
    15 C7 A8 H/C 2.3 Blower/PI
    14 Gen 5 Viper
    Custom Mid Engine chassis, AKA GalBen C

  3. #3
    Tuning Addict WS6FirebirdTA00's Avatar
    Join Date
    Jan 2005
    Location
    Concord, NC
    Posts
    8,093
    Thanks!

  4. #4
    This is a bug in scanner software? Engine control functions normally?