Results 1 to 3 of 3

Thread: Why does the camera display always show "15558.." in the data A box?

  1. #1
    Potential Tuner
    Join Date
    Apr 2019
    Posts
    4

    Why does the camera display always show "15558.." in the data A box?

    The timer is set to "basic", Map is On. As a newbie, I think I am doing something wrong, but I am not sure what.

    Thanks in advance.

    Bill

  2. #2
    HPT Employee Weston@HPTuners's Avatar
    Join Date
    Jul 2014
    Location
    39.735034, -103.894459
    Posts
    778
    Most likely that channel is set to something that is reporting that as a value. If you go to the Camera Preview screen, you can tap on the Data A box, then scroll down to the "Data A:" selection to see (and change) what its set to.

    For data channels that have a large number of digits, you may see the screen clip the text a bit, or add "..." to the end, but this shouldn't be an issue for most data channels that are available.

  3. #3
    Potential Tuner
    Join Date
    Apr 2019
    Posts
    4
    Thank you.