On my scan logs I notice the "unknown 02.69.00...." value in the Trans Current Gear Channel. Low to part throttle. Attached scan file shows unknown value in the 1-2 and 2-3 shifts. Lasts .4-.6 seconds. I don't know if it is related, but the car experiences a momentary stumble, goes flat, then back to normal at about the same time as these shifts occur? Otherwise car seems to run fine.
That's your torque converter locking/unlocking. There is a correlation between engine rpm and output shaft rpm that helps the TCM know what gear your in, but with the converter unlocked now the engine is revving all over the place and not correlating between tire speed, trans output shaft, and engine rpm. So just says unknown for a second.