Results 1 to 5 of 5

Thread: Cannot see DTC codes in Editor uning Windows Pro and Dell E6440

  1. #1
    Advanced Tuner
    Join Date
    Aug 2005
    Location
    Posts
    293

    Cannot see DTC codes in Editor uning Windows Pro and Dell E6440

    Hi, stupid issue that I'm hoping is an easy fix. Using a Dell E6440 with Windows 7 Pro. When I open up the editor and go to engine diagnostics and DTC's I cannot see the full error codes. Most of them are cut off. I've tried different display settings and still the same thing. Any idea how to fix this?

    TIA!
    GO RAIDERS!!!!!!!!!!

    02 C5 Z06
    8.8@160

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    26,120
    Post the .hpt file, I have a feeling I know what the issue is but without it I'd just be guessing.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Advanced Tuner
    Join Date
    Aug 2005
    Location
    Posts
    293
    stock tune.hpt

    Here it is-thank you!
    GO RAIDERS!!!!!!!!!!

    02 C5 Z06
    8.8@160

  4. #4
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    26,120
    looks fine to me
    Attached Images Attached Images
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  5. #5
    Advanced Tuner
    Join Date
    Aug 2005
    Location
    Posts
    293
    Quote Originally Posted by Bill@HPTuners View Post
    looks fine to me
    Hi Bill, I fixed it. Had to change the resolution on my laptop from the recommended 1920 to 1366x768. That was it. The recommended window's setting messed it up.

    Thank You!
    GO RAIDERS!!!!!!!!!!

    02 C5 Z06
    8.8@160