Results 1 to 6 of 6

Thread: can't delete CEL (Permanent Cat Efficiency codes bank 1 bank 2)

  1. #1
    Tuner in Training
    Join Date
    Oct 2017
    Posts
    33

    can't delete CEL (Permanent Cat Efficiency codes bank 1 bank 2)

    hello
    i have tuned c63 AMG everything is great except the CAT codes as the car is decated,i have tried few ways to disable the codes and i made sure that there is no other codes in the TCM or ECU..they keep coming back again after time,

    i didn't have that issue with while the car was running someone else tune by WinOls

    Thanks,

    Sam.

  2. #2
    Senior Tuner BackyardTurbo_FTW's Avatar
    Join Date
    Jul 2009
    Location
    East Suckburg, PA
    Posts
    1,152
    Besides just deleting the codes for specific faults there are also cat tests and downstream o2 tests you can disable in the engine diagnostic tab. Try disabling those and see if that helps!

  3. #3
    Tuner in Training
    Join Date
    Oct 2017
    Posts
    33
    thanks i will give that a try and update you

  4. #4
    Tuner in Training
    Join Date
    Oct 2017
    Posts
    33
    Hello,
    i have tried that and i still get CEL,
    that's the only codes the ecu is showing,i confirmed with different diagnostic tools.

  5. #5
    Tuner in Training
    Join Date
    Jan 2019
    Posts
    20
    I have issues with turning off the secondary air pump codes as well

  6. #6
    Tuner in Training
    Join Date
    Jun 2019
    Posts
    19
    any permanently logged faults will need an appropriate tool to clear. STAR/DAS or other.

    to disable the fault from appearing you'll need to disable the fault and not just the MIL checkbox.