Results 1 to 3 of 3

Thread: Torque limit in scanner

  1. #1
    Tuner in Training
    Join Date
    Mar 2012
    Posts
    16

    Torque limit in scanner

    Hello,

    Is it possible that the delivered Torque is limited at 868Nm ?
    I have e few measures with a very long torque of 868Nm.
    Version 3.6.26

    Markus

  2. #2
    Potential Tuner
    Join Date
    Feb 2016
    Posts
    6
    I'm seeing 640 ft lbs (868Nm) all the time and I'm over 800 ft lbs to the wheels (dyno). Appears to be a limit -- still present in 4.4.1.0 (latest) and 4.2.1.x (previous release). Not sure if there is a 'calc' we can use to overcome that limit. I can see that not being a 'big' issue to resolve though as I'm would assume there are other methods to get that # -- same with HP...

    -Don

  3. #3
    Tuner
    Join Date
    Jun 2015
    Location
    TN
    Posts
    189
    You could use "Engine Torque" instead of "Delivered Torque" That way you see more than the 640 limit

    RPS Twin Carbon Clutch
    Kook's Headers
    Ported Supercharger
    Cold Air Inductions cai
    ID850's
    GPTuning 2.5 Cam
    9.1 Lower 2.5 Upper