I tried to set the RPM and TPS to disable the AC at high load.
I see nothing in the log to confirm it worked. Serial command for AC is still on and no other status or changes. The pressure does come down, but it comes down and stays down while the AC is working. I think that was simply based on the HVAC adapting to meet temp.
I am on my phone, but I can post the log if needed. I really am just seeing if anyone else had success.
Sulski Performance Tuning
2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB
https://forum.hptuners.com/showthrea...l=1#post110025
Still trying to search, I see this on the C6. Sounds like you may have to put the RPM high and then set TPS?
Sulski Performance Tuning
2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB
Does not work.
Reply With Quote