Results 1 to 4 of 4

Thread: Requesting more load

  1. #1
    Advanced Tuner
    Join Date
    Sep 2016
    Posts
    389

    Requesting more load

    I have been working on a couple ecoboost mustangs, i have noticed that even if i make the driver demand table flat or give it higher numbers with more rpm requested load seems to always follow the same shape of peaking near 5000 and then falling, so i get 2.2 load from 3500rpm to 5300 from there it just tails down to 1.6 load at 6500. I can get more peak load but always following the same shape, how are you guys solving this.

    here is a logged example
    dyno3.hpl

  2. #2
    Senior Tuner Higgs Boson's Avatar
    Join Date
    Mar 2010
    Location
    Texas Hill Country
    Posts
    3,299
    there are lots of limiter tables you probably need to address.

  3. #3
    Tuner
    Join Date
    Nov 2018
    Location
    Denver, CO
    Posts
    85
    Looks like your TIP actual is well above TIP desired. Your timing seems to be super conservative too, something you could fix. Post your tune.

  4. #4
    Advanced Tuner
    Join Date
    Sep 2016
    Posts
    389
    Quote Originally Posted by V8_Kind_Of_Guy View Post
    Looks like your TIP actual is well above TIP desired. Your timing seems to be super conservative too, something you could fix. Post your tune.
    fuel quality wasnt that good
    tune1 91 oct.hpt