Results 1 to 9 of 9

Thread: Chassis Cab Support?

  1. #1
    Tuner in Training
    Join Date
    Feb 2016
    Location
    Central MN
    Posts
    27

    Chassis Cab Support?

    Any plans on supporting the work trucks? I have a 2012, G56, CM2200, 12300230AK cal.
    SOLD - 05.5 3500 5.9 | G56 | CM848 ECU | HPT "Pretty Fast" Tune | FASS 95 | Custom 5in Intake | Straight 4in |
    SOLD - 08 F450 6.4 | 5R110W | Modified | ? Tow Tune | Custom 4" |

    New - 12 Ram 4500 6.7 | G56 | CM2200 | RaceMe | Straight 4" | K&N Drop in

  2. #2
    Tuner in Training
    Join Date
    Nov 2017
    Posts
    21
    I had no problem with my 08 5500 C2100.

  3. #3
    Tuner in Training
    Join Date
    Feb 2016
    Location
    Central MN
    Posts
    27
    I think the CM2200 and 2350 are write only. I'm getting a check sum error, probably from the RaceMe.

  4. #4
    Tuner in Training
    Join Date
    Nov 2017
    Posts
    21
    Yes that will be from existing programmer. My h&s causes that also. Works fine if removed.

  5. #5
    Tuner in Training
    Join Date
    Feb 2016
    Location
    Central MN
    Posts
    27
    Tried setting it back to stock. Guessing it won't properly reset the check sum.
    SOLD - 05.5 3500 5.9 | G56 | CM848 ECU | HPT "Pretty Fast" Tune | FASS 95 | Custom 5in Intake | Straight 4in |
    SOLD - 08 F450 6.4 | 5R110W | Modified | ? Tow Tune | Custom 4" |

    New - 12 Ram 4500 6.7 | G56 | CM2200 | RaceMe | Straight 4" | K&N Drop in

  6. #6
    Banned
    Join Date
    Jan 2018
    Location
    Everywhere
    Posts
    1,772
    Ask for a recovery from RaceME. It?ll apply a pure factory flash to the ecm.

  7. #7
    Tuner in Training
    Join Date
    Feb 2016
    Location
    Central MN
    Posts
    27
    I have a stock file, its just in .ctz format.
    SOLD - 05.5 3500 5.9 | G56 | CM848 ECU | HPT "Pretty Fast" Tune | FASS 95 | Custom 5in Intake | Straight 4in |
    SOLD - 08 F450 6.4 | 5R110W | Modified | ? Tow Tune | Custom 4" |

    New - 12 Ram 4500 6.7 | G56 | CM2200 | RaceMe | Straight 4" | K&N Drop in

  8. #8
    Banned
    Join Date
    Jan 2018
    Location
    Everywhere
    Posts
    1,772
    .ctz is for EFI Live, not RaceME and isn?t the same thing or close to it, not even a pure factory flash file. Either a dealership reflash or a recovery file from RaceME is what you need.

  9. #9
    Banned
    Join Date
    Jan 2018
    Location
    Everywhere
    Posts
    1,772
    The RaceME enters into a different bootloader to apply a pure unadulterated Chrysler flash file, no code patches or anything.