Page 1 of 2 12 LastLast
Results 1 to 20 of 26

Thread: 2016 Challenger Hellcat injector data

  1. #1

    2016 Challenger Hellcat injector data

    what data is important to swap over? The voltage offset table from a hellcat is quite different, HC says pressure differential on Y axis and the Challenger say injector vacuum. I changed stoich, its on E85. Does anyone have a cal with successful injector data from a HC into a 6.4 challenger?

  2. #2
    Tuner in Training
    Join Date
    Feb 2019
    Location
    Lewisville Texas
    Posts
    38
    all this data is important
    Attached Images Attached Images

  3. #3
    That bottom voltage offset table is way different than the 2016 charger. Charger says vacuum, HC says differential pressure.

  4. #4
    Advanced Tuner Blue Bee's Avatar
    Join Date
    Mar 2017
    Location
    DFW
    Posts
    330
    I have an offset table for HC inj in a 6.4, send me your email. I had a set flowed to get data.

  5. #5

  6. #6
    Tuner in Training
    Join Date
    May 2017
    Posts
    21
    [email protected] can you send it to me too been trying to do this for awhile

  7. #7
    Tuner in Training
    Join Date
    Mar 2018
    Posts
    27
    Hey there! Is it possible for me to have injector data emailed as well? I have installed a set into a 6.4 as well and have it running pretty well, but am missing offset data. I would really appreciate it!
    [email protected]

  8. #8

  9. #9
    Tuner in Training
    Join Date
    Mar 2018
    Posts
    27
    Thanks so much! Very valuable information and grateful you were kind enough to share.

  10. #10
    Potential Tuner
    Join Date
    Apr 2017
    Posts
    3
    Quote Originally Posted by Blue Bee View Post
    I have an offset table for HC inj in a 6.4, send me your email. I had a set flowed to get data.
    Blue Bee any chance you could email me that data as well? I've been searching all over for good data. [email protected]

  11. #11
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    815
    If anyone has this data and can share it, please PM me.

    Thanks!

  12. #12
    Potential Tuner
    Join Date
    Dec 2020
    Posts
    1
    Hey Guys I too am after this same information as we are fitting Hellcat injectors into a 5.7 challenger that has been procharged. I have the Inj PW vs fuel mass etc but no offset data with injector vaccum as the Y axis, If anyone could PM or email me this data I would be eternally grateful.

    Kind regards
    Nate
    [email protected]

  13. #13
    Tuner in Training
    Join Date
    Oct 2020
    Posts
    10
    Could I get that info also. Thanks

    [email protected]

  14. #14
    Anyone who has this data care to post a screen shot of it for us? ����

  15. #15
    Advanced Tuner
    Join Date
    Jan 2022
    Posts
    882
    did you see this one?
    Attached Images Attached Images
    [email protected]

    don tanklage

  16. #16

    Talking

    Quote Originally Posted by LilSick View Post
    did you see this one?
    Yes I did. Just not sure if I should try it that way

  17. #17
    Quote Originally Posted by christianreid22 View Post
    Yes I did. Just not sure if I should try it that way
    Ive got something that seems to work pretty close.
    This was tested on a stock 2014 Jeep 6.4L with no other mods other than the HellCat Injectors to run E85 at the track. Currently running 91.

    email me your tune and ill put the data in for you.

    r dot francescone at outlook.com

    Rick

  18. #18
    Quote Originally Posted by calgarylsswapper View Post
    Ive got something that seems to work pretty close.
    This was tested on a stock 2014 Jeep 6.4L with no other mods other than the HellCat Injectors to run E85 at the track. Currently running 91.

    email me your tune and ill put the data in for you.

    r dot francescone at outlook.com

    Rick
    Email sent, thank you!

  19. #19
    Tuner in Training
    Join Date
    Mar 2023
    Posts
    14
    can i get the info as well? [email protected]

  20. #20
    Potential Tuner
    Join Date
    Jul 2017
    Posts
    1
    When able can I get the data as well - [email protected]