Results 1 to 9 of 9

Thread: Transfer funtion for FRPP (GT500KR) intake 07-09 GT500

  1. #1

    Transfer funtion for FRPP (GT500KR) intake 07-09 GT500

    Anyone have those or a read from a car with one? Thanks!

  2. #2
    Advanced Tuner
    Join Date
    Feb 2012
    Location
    TEXAS
    Posts
    631
    flow
    945
    805.86
    687.7
    587.89
    502.905
    430.12
    367.845
    316.08
    270.725
    231.9
    198.77
    170.07
    125.005
    92.58
    67.525
    58.52
    42.6
    36.355
    31.175
    27.425
    21.505
    18.87
    16.45
    13.725
    11.49
    8.67
    6.055
    5.055
    0

  3. #3
    Quote Originally Posted by mstang_man View Post
    flow
    945
    805.86
    687.7
    587.89
    502.905
    430.12
    367.845
    316.08
    270.725
    231.9
    198.77
    170.07
    125.005
    92.58
    67.525
    58.52
    42.6
    36.355
    31.175
    27.425
    21.505
    18.87
    16.45
    13.725
    11.49
    8.67
    6.055
    5.055
    0
    That doesn't look right?

  4. #4
    Advanced Tuner
    Join Date
    Feb 2012
    Location
    TEXAS
    Posts
    631
    That is starigh out of my SCT software, for 2011 gt500 base 2007-2009 was upgrade to 113mm CAI kit

    2008 Ford Shelby GT500KR – Specifications and Design Highlights
    5.4-liter supercharged V-8 producing an estimated 540-horsepower and 510 ft.-lbs. of torque
    Ford Racing Power Upgrade Pack featuring revised calibration and cold air intake system
    6-speed manual transmission with 3.73:1 rear axle ratio
    Ford Racing performance exhaust system
    Unique performance suspension tuning: springs, dampers, and stabilizer bars
    Shelby-designed 'GT500KR' 20-inch wheels (18-inch version for production)
    Ford Racing short-throw shifter and front strut tower brace
    Unique carbon composite hood featuring classic Shelby 'KR' design
    Front brake cooling ducts
    'Shelby' lettering across the front edge of hood and rear decklid
    40th Anniversary badges on the front quarter panels
    Carroll Shelby signature embroidered headrests and floor mats
    Official Shelby CSM 40th Anniversary GT500KR dash plate
    Last edited by mstang_man; 05-20-2019 at 06:30 AM. Reason: misisng data

  5. #5
    Quote Originally Posted by mstang_man View Post
    That is starigh out of my SCT software, for 2011 gt500 base 2007-2009 was upgrade to 113mm CAI kit

    2008 Ford Shelby GT500KR ? Specifications and Design Highlights
    5.4-liter supercharged V-8 producing an estimated 540-horsepower and 510 ft.-lbs. of torque
    Ford Racing Power Upgrade Pack featuring revised calibration and cold air intake system
    6-speed manual transmission with 3.73:1 rear axle ratio
    Ford Racing performance exhaust system
    Unique performance suspension tuning: springs, dampers, and stabilizer bars
    Shelby-designed 'GT500KR' 20-inch wheels (18-inch version for production)
    Ford Racing short-throw shifter and front strut tower brace
    Unique carbon composite hood featuring classic Shelby 'KR' design
    Front brake cooling ducts
    'Shelby' lettering across the front edge of hood and rear decklid
    40th Anniversary badges on the front quarter panels
    Carroll Shelby signature embroidered headrests and floor mats
    Official Shelby CSM 40th Anniversary GT500KR dash plate
    Ok so that's the 2008 GT500KR transfer? Does SCT have a value file for that 113mm kit to or no? I saw a file on here that said it was a GT500 with FRPP intake but I am not sure if it's correct.

  6. #6
    Advanced Tuner
    Join Date
    Feb 2012
    Location
    TEXAS
    Posts
    631

    GT 500KR Actual MAF

    I will look thru my files and see what i have..
    Attached Images Attached Images
    Last edited by mstang_man; 05-23-2019 at 07:41 PM. Reason: attachment

  7. #7
    Quote Originally Posted by mstang_man View Post
    I will look thru my files and see what i have..
    That's what it shows for the stock 07-09 maf. Weird

  8. #8
    Senior Tuner veeefour's Avatar
    Join Date
    Oct 2016
    Location
    Poland
    Posts
    1,711
    Quote Originally Posted by dsblk93gt View Post
    That's what it shows for the stock 07-09 maf. Weird
    It's OK, they just put everything in one table.

  9. #9
    Quote Originally Posted by veeefour View Post
    It's OK, they just put everything in one table.
    I mean the one posted appears to be a stock 07-09 not the KR intake which is the FRPP intake. 113mm I think