Results 1 to 3 of 3

Thread: Mini stock with 2011 ford Ranger 2.3 , limited to 6k rpm.

  1. #1
    Potential Tuner
    Join Date
    Mar 2016
    Posts
    3

    Mini stock with 2011 ford Ranger 2.3 , limited to 6k rpm.

    foxbody mini stock car, customer built car, Can't get it to run past 6k rpm. Goes into fuel cut mid track. I've Raised fuel cutoff to well above the desired range, set all torque and vehicle speed parameters to 1.0 to disable and can't seem to remove the limiter. Mechanically is maintaining fuel pressure and etc at rpm.
    Any advice would be greatly appreciated. Thanks, Luke
    Attached Files Attached Files

  2. #2
    What do all of your tables with "vs. Rpm" max out at?

  3. #3
    What is the MAF flow at? A log would be helpful. Oil Temperature based cutoff is enabled but I don't think it has a sensor. Is the engine pretty much stock?