Cool, ill take a look and see if i can do it
Cool, ill take a look and see if i can do it
2019 challenger rt
k&N cold air intake
92mm hellcat throttlebody
ported 392 intake manifold
ported eagle heads
Cammotion custom 222/234 cam
stainless works long tube headers and catless mid pipes
3' catback with h-pipe & pypes violator mufflers
e-85 tuned
3.70 lsd
So i cant connect to anything. All it says is there is no control unit found. So how do i go fixing that?Originally Posted by Homer
2019 challenger rt
k&N cold air intake
92mm hellcat throttlebody
ported 392 intake manifold
ported eagle heads
Cammotion custom 222/234 cam
stainless works long tube headers and catless mid pipes
3' catback with h-pipe & pypes violator mufflers
e-85 tuned
3.70 lsd
what interface are you using and in what mode...USB, wifi, Bluetooth? Also what does your advanced settings look like? Remember, alpha does not work with the HP tuner interface.
advanced.png
Im useing the usb. I can get it to reconize the device, but i cant connect to the vehicle. Says its not there
2019 challenger rt
k&N cold air intake
92mm hellcat throttlebody
ported 392 intake manifold
ported eagle heads
Cammotion custom 222/234 cam
stainless works long tube headers and catless mid pipes
3' catback with h-pipe & pypes violator mufflers
e-85 tuned
3.70 lsd
Are you able to share your bcm read? Apparently people don?t want to give it up..
what are you trying to do?
you know its not a real brake... it uses the abs
can add it to a non 1320 or HC with a tazer
as far as holding rpm that is a different box (2 step)
Reply With Quote