Results 1 to 3 of 3

Thread: Math IF/Then Logic in VCM Scanner

  1. #1
    Tuner in Training Viper's Avatar
    Join Date
    Nov 2004
    Location
    Posts
    19

    Math IF/Then Logic in VCM Scanner

    Does anyone know how to use if/then logic for a Math in VCM Scanner?

    For example, when throttle is greater than 35% then log the WB value against MAF Frequency to capture the EQ Error.

    Why is this important? It would make correcting MAF [and VE] on the upper end for boosted applications easier.

    Any thoughts on this?

    Thank you in advance.

  2. #2
    Tuner in Training
    Join Date
    Nov 2018
    Location
    Delaware
    Posts
    23
    You can filter the data in your graph setup, just add the variable for throttle position > 35
    Filter.jpg

  3. #3
    Tuner in Training Viper's Avatar
    Join Date
    Nov 2004
    Location
    Posts
    19
    That looks like it'll work for what I'm trying to do. Thank you.