Results 1 to 2 of 2

Thread: 2010 SHO 500nm ETC torque limit

  1. #1
    Tuner in Training
    Join Date
    Nov 2018
    Location
    Delaware
    Posts
    16

    2010 SHO 500nm ETC torque limit

    I have a 2010 SHO I'm working with and can't seem to figure out what is limiting my ETC torque to 500nm and also preventing power enrichment. I've been working my way through the calibration trying to figure out what is causing this limit but I'm stumped at this point. Thanks for your help!

    ETC Torque Request flat line at 500Nm
    500Nm Limit.jpg

    Tune and Log

    500Nm limit.hpl

    2010 Taurus SHO, DD increase.hpt

  2. #2
    Tuner in Training
    Join Date
    Nov 2018
    Location
    Delaware
    Posts
    16
    Update for anybody that may run into this, was able to work around torque limit by scaling the DD, Inverse and Indicated torque so that an ETC request over 499 is not possible.