Results 1 to 2 of 2

Thread: new to tuning. timing above commanded?

  1. #1
    Tuner
    Join Date
    May 2019
    Location
    new england
    Posts
    74

    new to tuning. timing above commanded?

    sorry if i missed something stupid simple. very new to tuning. but started with my bone stock air filter to tailpipe 2002 sierra 2500hd 6.0 4l80e. i do have an exhaust manifold leak(assuming the cause of the slight high fuel trim).
    purchased wide band but have not hooked up yet.
    at about 48s into scan i have knock at about 4k and .78cyl g. reading 22*, but in my high octane timing table it shouldnt be that high there...... and yes my table needs a lot of smoothing.
    help appreciated
    been reading and watching videos for weeks now before i even licensed ecm. sorry if it a dumb question.

    what am i missing?
    Attached Files Attached Files

  2. #2
    Tuner in Training
    Join Date
    Nov 2018
    Posts
    29
    There are adder tables to the main spark map...Engine >Spark >Advance / Base Corrections ...Fuel,IAT,ECT...
    try a scan with this channel list...
    Attached Files Attached Files
    Last edited by wodin67; 05-18-2019 at 11:19 AM.
    02 Silverado Z71 4x4 RCSB SS