Results 1 to 3 of 3

Thread: Run Time Tuning

  1. 06-30-2019 #1
    Keith@Dyno-Time
    Keith@Dyno-Time is offline
    Tuner in Training
    Join Date
    Oct 2015
    Posts
    10

    Run Time Tuning

    Run Time Tuning would be a huge benefit to me on my current project. I have version 3.4 on one of my computers, but my MPVI has been updated to use version 4.4,and won't communicate with the vehicle (using version 3.4, version 4.4 yes). Version 3.4 was the latest version that mentioned RTT. Two questions for experienced tuners:
    1. Did RTT function satisfactorily in version 3.4?
    2. Can the recent firmware update for the MPVI Pro be rolled back to work with version 3.4?

    Thanks for any input you might have.

    Keith
    Reply With Quote Reply With Quote
  2. 06-30-2019 #2
    Ben Charles
    Ben Charles is offline
    Senior Tuner Ben Charles's Avatar
    Join Date
    Aug 2009
    Location
    Calibrating
    Posts
    3,373
    Not available on gen 4 ECUs, not enough room

    Email Tunes, [email protected]
    96 TA Blown/Stroked, 4L80E/Fab 9
    15 C7 A8 H/C 2.3 Blower/PI
    14 Gen 5 Viper
    Custom Mid Engine chassis, AKA GalBen C
    Reply With Quote Reply With Quote
  3. 06-30-2019 #3
    Keith@Dyno-Time
    Keith@Dyno-Time is offline
    Tuner in Training
    Join Date
    Oct 2015
    Posts
    10
    Thanks, Ben. You saved me a lot of time chasing something that wouldn't work in the end.

    Keith
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »