So I'm relatively new to tuning, spent a lot of time researching information before starting this process.
I have found through a lot of my searches before making this post that the 60lb injectors are kind of difficult to tune correctly. I'm wondering if anyone can take a moment to look through this tune and log and tell me if I'm missing something that's making this truck not able to idle. I can start the engine and go 100% TPS and make it run and then It goes to around 500RPM and stays there and dies as soon as I jump off the throttle. I have MPVI 1 so I cant log the wideband but it was very very rich.
Thanks for your time, not looking for a free tune from someone just kinda stumped on the idling part and on the verge of buying injectors with actual data (like I should of done in the first place)