Hello all,
Trying to get some more definitive information on the limitations of the injector drivers on the e38.
Specifically, can the wiring be setup to allow for batched/dual 8 injector control? Or said differently, can 2 sets of 8 injectors be wired in parallel with added resistors to mirror 8 injectors?without causing additional amperage draw or control issues? Or in series without causing control issues in low-pulse width situations like idle?
My project will necessitate the use of injectors above a 6-71 blower, and would REALLY like to keep tuning fidelity for each cylinder as needed, which would mean keeping an injector in each port.
All injectors would be the same flow rate?42lb?but 16 of them instead of 8.
Thanks in advance!
~Ryan
Charleston, SC