Good day all,
I installed this gauge, very straight forward and easy. Added wb eq ratio 1 channel in hp tuners scanner. Tried to connect and it made several of the channels in the scanner disappear or not work. So I repolled, disco, reco'd. Went to add the wb eq ratio channel back in and it isn't there. However under serial port there is aem options to add and transform. I have done this and found an wb eq ratio 1 to transform. This disappears when I start scanning.
Lastly I found the AEM 30.-03x0,2340, 5130 to transform. I have done this but haven't been back home to see if it will work.
Car is a 14 ZL1...any help would be greatly appreciated.