Results 1 to 5 of 5

Thread: Vcm editor stopped working

  1. #1
    Tuner in Training
    Join Date
    May 2019
    Posts
    14

    Vcm editor stopped working

    Anybody have a clue why my editor just stopped working? here's the scenario I was working on a tune and suddenly I couldn't get any of the tabs to open. figured my laptop was acting up so I cleared the cache and restarted. no go. checked up to date, all good. re-synced interface, no good. un-installed and reinstalled VCM suite, still no go. I can open VCM scanner, load a tune, and then that's it, if I click on the engine tab for example nothing happens. laptop is working fine otherwise, tried various tunes stored on my laptop and flash drive. MIND BLOWN.

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    26,235
    click window-cascade
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Tuner in Training
    Join Date
    May 2019
    Posts
    14
    Quote Originally Posted by Bill@HPTuners View Post
    click window-cascade
    WHAT. THE. F**K.

    I have wasted several hours of my life on something this stupid. you guys should work on this.

    thanks just the same.

    p.s. edit: I would like to know how this problem happened ( I didn't click on it to not "cascade") and if I reinstalled the program entirely why would it not reset the configuration back to default???
    Last edited by blbarlow2007; 05-23-2019 at 05:28 PM.

  4. #4
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    26,235
    We've been unable to recreate it so we've been unable to "fix" your windows being outside of the bounds. Thankfully its a simple fix and doesn't happen very often.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  5. #5
    Tuner in Training
    Join Date
    May 2019
    Posts
    14
    Well you are my hero for the day Bill, thank you!