Ok guys I got my wideband hooked up and running, have it logging in the vcm just fine only problem is its in voltage and that don't help me much. Id like to see it as actuall AFR or even in Lambda if at all possible. Ive used the search feature with no luck so if someone could point me in the right direction that be great. Also which histos would be the best to log with it as well. I tried to set up a afr err but was not successful
wideband is MTX-L Innovate
HP tuner pro
I have the output of WB hooked up to blue wire and the black wire ground with same ground on WB.