Results 1 to 1 of 1

Thread: 2010 SS M6 Fast Idle after SC install

  1. #1
    Potential Tuner
    Join Date
    May 2017
    Posts
    3

    2010 SS M6 Fast Idle after SC install

    Finished getting my Camaro back together. Had a P2176 on initial start up got that sorted - idle was fine. Then had fast idle issues. I thought that my ported throttle body might be the cause. I swapped the stock TB back on and recorded these two attached logs.Through both runs scanner detected no DTC's.

    First start idle went to 1300 but settled down to ~900. Engine warmed a bit. Gave it some revs and idle went to 1600 and would not settle back down. Tried it a second time and idle went to 1900 then settled to 1600... Secondary O2 sensors are tuned out. but are still connected with no cats.

    The initial tune is also attached.

    Thanks,