-
Tuner in Training
Cyl Mass to be Delivered
Just want to ask if it is important to keep these parameters standard or should I start with setting all 8 cyl to 1.0
Why are they different on some cyl from the factory?
Capture.JPG
-
Advanced Tuner
I beleive that table is to adjust for cylinder to cylinder a/f distribution.
How would you know what to change unless you had a wideband in each exhaust runner?
-
Tuner in Training
Good point... and I agree. I saw that they are different for various 392's and was wondering if there is a way to tune that or just leave it at a standard value of sorts
-
Advanced Tuner
I would only change them if you are swapping manifolds such as going to a PD blower
-
Tuner in Training
Ok, thanks. It is odd that some is left at 1 and some as ever so slightly above 1.